We are one of the worlds leading companies in producing electrical heating elements! We are producing parts for various machines and products and deliver to multiple branches. More than 70.000 electric heaters are daily produced in our plants. 70.000 electric heaters are daily produced in our plants.

Metal-sheathed cartridge heater with ground sheath. The special construction allows an extremely high surface loading, i.e. maximum power in the smallest possible space. UL-approved executions available.

High power cartridge heater for thermostats or preheating of oil or petrol. High compactness allows high surface loading, i. e. giving the maximum power in the smallest space.

High performance tubular cartridge heaters offer a high watt density at a low mass. They are used, where space is at a premium. RP/RPT type heaters are available with and without thermocouple.

Compacted and metalsheathed heater with flat oval crossection; one-, two- or three- connection pins on one or both sides. Sheath material: CrNi-steel. Heat conductor: Chrome nickel wire NiCr 8020 or other NiCr alloys. Insulation material: Pure magnesium oxide

The nozzle heaters type HPQ are a further development of the conventional Türk+Hillinger nozzle heaters type HP. Basis of the nozzle heaters type HPQ is a low mass tubular heater type RP/RPZ, coiled into a slot of a cylindrical sleeve with precise ID. Optional the nozzle heaters are deliverable with or without thermocouple.

The heater consists of a low mass tubular cartridge heater type RP or RPT coiled into a cylinrical sleeve with precise ID. It is available with or without thermocouple

Metal-sheathed compacted tubular heater, available in straight or bent execution. Threaded stud connections i. e. at both ends.

The FLEX is a robust tubular heating element with excellent thermal properties, which can freely be bent by hand. Each heater must undergo an individual test i.a.w. (VDE 0700).

The sheathed thermocouple type TE consists of a thermocouple which is integrated in a stainless steel shealth and embedded in highly compacted magnesium oxide for an optimum electrical insulation. Easy to bend.

Compacted resistor with flat rectangular section. Applications include the smoothing of power peaks for electronic speed controllers.

Steel grid element resistors (Type EPH-S) are made of heat-resistant steel. The resistance value of the individual elements are temperature-dependent and the temperaturecoefficient is higher than classic wire-wound power resistors, Type ALW, however much smaller than the cast resistors.

Complete, ready to use heating units for rail points, consisting of flat heater type RKF-24 and watertight connection box. All accessories for fixing to standard S 49, S 54 and UIC 60 rails.

Electrical heating element consisting of 3 u-shaped tubular heaters, which are brazed or welded onto a threaded nipple G 11/2 and can be supplied with a thermostat or / and a temperature limiter.

Flanged heating elements with and low surface loads high performance. For heating oil, water, drinking water, air, CO2 and another gaseous. Process heat for several applications, building technologys, renewable energy.

Finnend tubular heating elements are based on a RHK type heaters. The surface area is enlarged by a strip in order to heat gases. At a high power the surface temperature is small and the heating element is short.

Channel heater with a housing of zinc-plated sheet metal with flanges on both side and mounted finned heaters type RHR. Air conditioning and climatisation, industrial dryers.

Heater with exosed heating filament located onto ceramic former or mica strip with a sheet metal housing. For use only with upstream or downstream fan blowers.

Flat heating element with CrNi-steel sheath and integrated tubular heater type RHK. Heating of surfaces, e.g. heating boilers, heating frames, heating of plates, stamping dies and moulds, antifreeze for liquid tanks.

Heating elements in cartridge shape or in special executions equipped with self-regulating resistance elements. Heating of liquids, preheating of oil and petrol, frost protection.

Ceramic unit without metal casing. The heating wire is located in several axially-parallel holes and is prevented from coming out by locked ends. The connections are on a plug-in head.

The world’s first reliably functioning air heating element up to 1000 °C in the form factor 150 x 150 mm based on resistance elements. The application is not limited to pure air heating, but is successfully used in special plant construction in the areas of exhaust gas treatment and the heating of industrial gases.

Heating element with CrNi-steel sheath. Insulated by compacted MgO. Insulated connection leads at one end and steamproof seals.

Metal-sheathed catridge heater with outer sheath of CrNi-steel. Compared with conventional catridge heaters of the same dimension and power, these have greater mechanical strength and a longer life. Suitable for heating solid and fluid media.