High performance tubular cartridge heaters offer a high watt density at a low mass. They are used, where space is at a premium. RP/RPT type heaters are available with and without thermocouple.

Compacted and metalsheathed heater with flat oval crossection; one-, two- or three- connection pins on one or both sides. Sheath material: CrNi-steel. Heat conductor: Chrome nickel wire NiCr 8020 or other NiCr alloys. Insulation material: Pure magnesium oxide

The nozzle heaters type HPQ are a further development of the conventional Türk+Hillinger nozzle heaters type HP. Basis of the nozzle heaters type HPQ is a low mass tubular heater type RP/RPZ, coiled into a slot of a cylindrical sleeve with precise ID. Optional the nozzle heaters are deliverable with or without thermocouple.

The heater consists of a low mass tubular cartridge heater type RP or RPT coiled into a cylinrical sleeve with precise ID. It is available with or without thermocouple

Metal-sheathed compacted tubular heater, available in straight or bent execution. Threaded stud connections i. e. at both ends.

The FLEX is a robust tubular heating element with excellent thermal properties, which can freely be bent by hand. Each heater must undergo an individual test i.a.w. (VDE 0700).

The sheathed thermocouple type TE consists of a thermocouple which is integrated in a stainless steel shealth and embedded in highly compacted magnesium oxide for an optimum electrical insulation. Easy to bend.

Compacted resistor with flat rectangular section. Applications include the smoothing of power peaks for electronic speed controllers.

Steel grid element resistors (Type EPH-S) are made of heat-resistant steel. The resistance value of the individual elements are temperature-dependent and the temperaturecoefficient is higher than classic wire-wound power resistors, Type ALW, however much smaller than the cast resistors.