The nozzle heaters type HPQ are a further development of the conventional Türk+Hillinger nozzle heaters type HP. Basis of the nozzle heaters type HPQ is a low mass tubular heater type RP/RPZ, coiled into a slot of a cylindrical sleeve with precise ID. Optional the nozzle heaters are deliverable with or without thermocouple.

The heater consists of a low mass tubular cartridge heater type RP or RPT coiled into a cylinrical sleeve with precise ID. It is available with or without thermocouple

Metal-sheathed compacted tubular heater, available in straight or bent execution. Threaded stud connections i. e. at both ends.

The FLEX is a robust tubular heating element with excellent thermal properties, which can freely be bent by hand. Each heater must undergo an individual test i.a.w. (VDE 0700).

The sheathed thermocouple type TE consists of a thermocouple which is integrated in a stainless steel shealth and embedded in highly compacted magnesium oxide for an optimum electrical insulation. Easy to bend.

Compacted resistor with flat rectangular section. Applications include the smoothing of power peaks for electronic speed controllers.

Complete, ready to use heating units for rail points, consisting of flat heater type RKF-24 and watertight connection box. All accessories for fixing to standard S 49, S 54 and UIC 60 rails.

Electrical heating element consisting of 3 u-shaped tubular heaters, which are brazed or welded onto a threaded nipple G 11/2 and can be supplied with a thermostat or / and a temperature limiter.