HP – Nozzle heater
7. September 2017
RKF – Flat tubular heater
7. September 2017
Nozzle heater Q-series Type HPQ
DESCRIPTION
The nozzle heaters type HPQ are a further development of the conventional Türk+Hillinger nozzle heaters type HP. Basis of the nozzle heaters type HPQ is a low mass tubular heater type RP/RPZ, coiled into a slot of a cylindrical sleeve with precise ID. Optional the nozzle heaters are deliverable with or without thermocouple.
Advantage
- precise power distribution
- customer specific designs
- highest reproductivity
- smallest tolerances
- compact and robust design with small wall thickness
TECHNICAL DATA
| Base material | Brass or CrNi tube Sheath material of the tubular cartridge heater Nickel or CrNi-steel |
| Inner diameter | 5 – 30 mm (tolerance + 0,03) |
| Length | 20 – 400 mm |
| Min. wall thickness | 1,3 mm |
| Voltage | 12 – 230 V |
| Power tolerances | + – 10 % (smaller on request) |
| Power distribution | upon customer specification |
| Connection type | upon customer specification |
| Optional | available with integrated thermocouple |
APPLICATION
Heating of nozzles for the plastics industry, e.g. hotrunner systems, heating of liquids within tubes, heating of metals with circular cross section.
Download PDF
